Project Hub /Robotics & Autonomous Systems/Line Follower/Corona COVID-19 Detection Device

Intermediate

ARDUINO

Project Specific

3 – 6 Hours

Partial Kit

Corona COVID-19 Detection Device

A DIY concept device that detects potential COVID-19 symptoms by measuring body temperature and blood oxygen (SpO2) levels using an Arduino.

Originally published on ElectronicsForU

View original tutorial

Parts You'll Need

This project is sourced from another site, not written by us — this list is our best match of their components against what we stock, not a verified bill of materials. Always check the original blog (linked above) for the actual parts list before buying.

MPU6050 - Triple Axis Accelerometer + Gyroscope Module Rs. 438.00
0.96 Inch I2C/IIC 4pin OLED Display Module White Rs. 349.00
400 Points Mini Solderless Prototype PCB Breadboard High Quality Rs. 89.00
MB102 Adjustable Breadboard Power Supply Module (3.3V & 5V) for Arduino & Raspberry Pi Rs. 139.00
Jumper Wire 10 Pin Male To Male 20cm Rs. 45.00
Jumper Wire 10 Pin Male To Female 20cm Rs. 45.00

Selected: Rs. 0.00

We don't carry yet: Arduino (unspecified board)
Pulse / Heart Rate Sensor
9V Battery + Snap

Browse all components

How It Works

The Corona COVID-19 Detection Device is built around an Arduino Uno microcontroller, which acts as the central processing unit for monitoring key vital signs. To measure blood oxygen levels and pulse data, the system utilizes the MAX30100 sensor, which communicates with the Arduino to read photoplethysmography signals. For body temperature monitoring, the project employs either an MPU6050 motion sensor or an LM35 temperature sensor to capture thermal data from the user. Once the Arduino collects these biological measurements, it processes the raw data signals and formats them for visual output. An attached OLED display, driven by the u8g2 library, renders the processed health metrics clearly on screen in real time. The entire circuit is powered by a portable 5V to 9V small battery, making the diagnostic unit self-contained and easy to handle during testing.

Why Build This

Gain hands-on experience integrating medical-grade biometric sensors like the MAX30100 with an Arduino microcontroller.

Develop practical skills in programming I2C communication and rendering real-time sensor data onto an OLED graphical display.

Explore how embedded systems can be applied to preliminary health screening and vital sign monitoring concepts.

Real-World Application

Preliminary screening and health monitoring for viral respiratory infections such as COVID-19.

Skills You'll Learn

Microcontroller programming

I2C communication protocol

biometric sensor interfacing

OLED display rendering

analog/digital signal processing

power management with portable batteries

Safety Precautions

No specific precautions noted for this build — always follow general electronics safety practices.

Technology Tags

ARDUINO

SENSORS

OLED DISPLAY

MPU6050

MAX30100

HEALTH MONITORING

Frequently Asked Questions

Can this device officially diagnose COVID-19?

No, this is an educational concept device intended for preliminary health monitoring and screening practice, not for certified medical diagnosis.

What libraries do I need to install in the Arduino IDE?

You will need the MPU6050 library, the u8g2 display library, and the MAX30100 sensor library to successfully compile and run the code.

Can I use any standard battery to power the circuit?

Yes, the project is designed to run on a small 5V to 9V battery, providing enough voltage for the Arduino Uno and connected sensors to operate portably.

Gallery

This page is part of Kitkraft's Project Hub — a curated collection of electronics & robotics projects gathered from the maker community to help students and hobbyists discover and learn to build. Kitkraft does not claim authorship of the original project, and makes no representation as to the accuracy, completeness or safety of third-party source material. The summary and "How It Works" explanation above are AI-generated, rewritten with reference to the original tutorial — not a reproduction of it. Full credit and a direct link to the original source are provided above. If you're the original creator and have a concern about how your work is represented here, please contact us and we'll address it promptly.

Kitkraft Project Hub — curated from the maker community, credited at the source.

PRJ-00140