This project is sourced from another site, not written by us — this list is our best match of their components against what we stock, not a verified bill of materials. Always check the original blog (linked above) for the actual parts list before buying.
The Interfacing the A7672S 4G LTE GNSS Module with Arduino project integrates cellular connectivity and satellite positioning into an embedded hardware ecosystem controlled by an Arduino board. The core of the system is the A7672S module, which requires a dedicated power supply providing 5V to 12V with a minimum current capacity of 3A to handle high transient power demands during cellular network attachment and transmission spikes. Communication between the Arduino and the A7672S module typically occurs via UART serial interface, allowing the microcontroller to issue AT commands to control the cellular modem. A Micro SIM card must be inserted into the module's onboard slot to authenticate with a cellular network provider, enabling data transmission over 4G LTE. To facilitate proper signal propagation and location fixes, a 4G LTE antenna and a GNSS active antenna are attached to their respective u.FL or SMA connectors on the module. Through this hardware configuration, the Arduino can orchestrate tasks such as sending data packets over the internet or acquiring precise geographic coordinates from global navigation satellite systems.
Why Build This
Develop real-time vehicle and asset tracking systems using integrated cellular and GPS positioning technologies.
Implement remote IoT deployments and smart farming devices capable of transmitting environmental data over cellular networks.
Gain practical undergraduate-level experience interfacing high-current wireless communication peripherals with microcontrollers.
Ensure a stable power supply capable of providing at least 3A during cellular module startup spikes to prevent brownouts and unstable RF performance.
Technology Tags
4G LTE
GNSS
GPS
CELLULAR
IOT
AT COMMANDS
UART
SIM800L
MICROCONTROLLER
Frequently Asked Questions
No, the Arduino's onboard regulator cannot supply the 3A peak current required during cellular transmission spikes, which will cause brownouts and module resets.
You will use the Arduino IDE to write and upload sketches that communicate with the A7672S module using serial commands.
One antenna is specifically tuned for 4G LTE cellular communication, while the other is an active GNSS antenna designed to receive weak signals from navigation satellites.
Gallery
This page is part of Kitkraft's Project Hub — a curated collection of electronics & robotics projects gathered from the maker community to help students and hobbyists discover and learn to build. Kitkraft does not claim authorship of the original project, and makes no representation as to the accuracy, completeness or safety of third-party source material. The summary and "How It Works" explanation above are AI-generated, rewritten with reference to the original tutorial — not a reproduction of it. Full credit and a direct link to the original source are provided above. If you're the original creator and have a concern about how your work is represented here, please contact us and we'll address it promptly.
Kitkraft Project Hub — curated from the maker community, credited at the source.
Jumper Wire 10 Pin Male To Male 20cm
Rs. 45.00
MB102 Adjustable Breadboard Power Supply Module (3.3V & 5V) for Arduino & Raspberry Pi
Rs. 139.00
400 Points Mini Solderless Prototype PCB Breadboard High Quality
Rs. 89.00
Jumper Wire 10 Pin Male To Female 20cm
Rs. 45.00
