Project Hub /IoT & Connected Devices/Telemetry & Remote Logging/Raspberry Pi Video Streaming Over Internet

Intermediate

RASPBERRY PI

Project Specific

3 – 6 Hours

Partial Kit

Raspberry Pi Video Streaming Over Internet

Build a portable and secure live video streaming and motion surveillance system using a Raspberry Pi Zero and a mobile hotspot without paid cloud services.

Originally published on ElectronicsForU

View original tutorial

Parts You'll Need

This project is sourced from another site, not written by us — this list is our best match of their components against what we stock, not a verified bill of materials. Always check the original blog (linked above) for the actual parts list before buying.

Raspberry Pi 3 - Model B+ 1.4Ghz 64-bit quad-core Processor with 1 GB Ram (Original) Rs. 5,400.00
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Rs. 810.00
400 Points Mini Solderless Prototype PCB Breadboard High Quality Rs. 89.00
MB102 Adjustable Breadboard Power Supply Module (3.3V & 5V) for Arduino & Raspberry Pi Rs. 139.00
Jumper Wire 10 Pin Male To Male 20cm Rs. 45.00
Jumper Wire 10 Pin Male To Female 20cm Rs. 45.00

Selected: Rs. 0.00

We don't carry yet: SD / MicroSD Card

Browse all components

How It Works

The Raspberry Pi Zero 2 W serves as the central processing unit and network hub for this portable video streaming system. The 5MP Pi DSI Zero camera connects directly to the Raspberry Pi's high-speed DSI camera interface using the specialized ribbon cable, allowing it to capture raw visual data without consuming USB bandwidth. Raspberry Pi OS runs on the SD card to manage the hardware, coordinate system processes, and execute the Motion software. Motion software continuously monitors the video feed coming from the camera module for pixel changes, handling both local live streaming and motion-detection recording. To access this video feed securely over the internet without dealing with complex router port forwarding or paid cloud services, ZeroTier is utilized. ZeroTier creates a virtual private local area network (LAN) bridging your remote device and the Raspberry Pi Zero 2 W over mobile internet or standard Wi-Fi. Power is supplied reliably to the entire assembly via the 2A 5V Raspberry Pi power adaptor, ensuring stable operation of both the micro-computer and the attached camera module during continuous surveillance.

Why Build This

Create a portable, low-power home security camera that you can monitor remotely from your smartphone or laptop using a mobile hotspot.

Learn how to set up secure virtual private networks (VPNs) using ZeroTier to access IoT devices over the internet without expensive cloud subscriptions.

Build a custom wildlife observation or mobile monitoring station for school projects and field data logging.

Real-World Application

Portable home surveillance, remote monitoring using mobile internet, wildlife observation, and mobile security camera setups.

Skills You'll Learn

Linux operating system navigation

camera module integration

motion detection software configuration

virtual private network setup

IoT remote monitoring

Safety Precautions

No specific precautions noted for this build — always follow general electronics safety practices.

Technology Tags

RASPBERRY PI

VIDEO STREAMING

MOTION DETECTION

ZEROTIER

OPEN SOURCE SOFTWARE

CAMERA MODULE

IOT

LINUX

Frequently Asked Questions

Do I need a paid cloud storage subscription to view the video stream remotely?

No, this project uses ZeroTier to create a direct virtual private network connection to your Raspberry Pi, eliminating the need for paid cloud services.

Can I power this setup using a standard phone charger instead of the recommended adapter?

You need a power supply that can reliably deliver 2A at 5V, such as the recommended Raspberry Pi power adaptor, to prevent unexpected reboots caused by power drops from the camera module.

How does the camera connect to the Raspberry Pi Zero board?

The 5MP Pi DSI Zero camera connects via the specific RPi camera DSI ribbon cable directly into the dedicated DSI camera port on the Raspberry Pi Zero 2 W.

Gallery

This page is part of Kitkraft's Project Hub — a curated collection of electronics & robotics projects gathered from the maker community to help students and hobbyists discover and learn to build. Kitkraft does not claim authorship of the original project, and makes no representation as to the accuracy, completeness or safety of third-party source material. The summary and "How It Works" explanation above are AI-generated, rewritten with reference to the original tutorial — not a reproduction of it. Full credit and a direct link to the original source are provided above. If you're the original creator and have a concern about how your work is represented here, please contact us and we'll address it promptly.

Kitkraft Project Hub — curated from the maker community, credited at the source.

PRJ-01268