Project Hub /Basic Analog & Power Electronics/Arduino Album That Shows Photographs One-By-One Automatically

Intermediate

ARDUINO

₹1,500 – ₹5,000

3 – 6 Hours

Partial Kit

Arduino Album That Shows Photographs One-By-One Automatically

An automated digital photo album built with an Arduino Uno and a touch LCD shield that reads and displays bitmap photographs sequentially from a microSD card.

Originally published on ElectronicsForU

View original tutorial

Parts You'll Need

This project is sourced from another site, not written by us — this list is our best match of their components against what we stock, not a verified bill of materials. Always check the original blog (linked above) for the actual parts list before buying.

Arduino UNO R3 Board (Compatible) – ATmega328P Microcontroller with USB Cable Rs. 999.00
MB102 Adjustable Breadboard Power Supply Module (3.3V & 5V) for Arduino & Raspberry Pi Rs. 139.00
400 Points Mini Solderless Prototype PCB Breadboard High Quality Rs. 89.00
Jumper Wire 10 Pin Male To Male 20cm Rs. 45.00
Jumper Wire 10 Pin Male To Female 20cm Rs. 45.00

Selected: Rs. 0.00

We don't carry yet: LCD (generic / unspecified)
SD / MicroSD Card
SD Card Module

Browse all components

How It Works

This automated digital photo album operates through the coordination of an Arduino Uno board, a touch LCD shield equipped with an ILI9341 controller, and a microSD card. The user first prepares bitmap photographs using software like Microsoft Paint, ensuring the images match the resolution and formatting requirements of the display, and saves them onto a microSD card. The microSD card is then inserted into the integrated card slot on the Arduino touch LCD shield, which mounts directly onto the Arduino Uno board. Powered by a 9V DC power supply, the Arduino Uno executes a program written via the Arduino IDE. During operation, the microcontroller communicates with the microSD card reader to access the stored bitmap files sequentially. As data is read from the card, the Arduino processes the pixel information and transmits it to the ILI9341-driven touch LCD shield. The shield interprets these signals and refreshes the screen to display the photographs one by one in an automated sequence, combining digital storage retrieval with visual output hardware.

Why Build This

Develop custom graphic user interfaces and visual display systems for advanced microcontroller-based engineering prototypes.

Design portable slide viewers and automated digital picture frames using readily available prototyping hardware.

Gain practical experience integrating external storage media with embedded display controllers for data-heavy applications.

Real-World Application

Digital picture frames, portable slide viewers, and custom graphic user interfaces for microcontroller-based devices.

Skills You'll Learn

SPI communication protocol

SD card file system reading

bitmap image parsing

microcontroller display interfacing

embedded software sequencing

Safety Precautions

Ensure correct polarity when connecting the 9V DC power supply to avoid damaging the Arduino board and LCD shield.

Technology Tags

ARDUINO

TFT LCD

SD CARD

EMBEDDED SYSTEMS

BMP IMAGES

MICROCONTROLLERS

Frequently Asked Questions

What specific image format do the photographs need to be in for the display to read them?

The photographs must be formatted as bitmap (.BMP) files, typically prepared using an image editor like Microsoft Paint to match the resolution constraints of the ILI9341 display.

How does the Arduino access the image files if they are not stored directly on the board memory?

The image files are stored externally on a microSD card, which is inserted into the microSD card reader slot located directly on the touch LCD shield. The Arduino reads these files via its communication interfaces during runtime.

Can I use any power supply voltage for the Arduino Uno and LCD shield?

You must use a compatible 9V DC power supply, and it is critical to ensure correct polarity during connection to prevent permanent electrical damage to both the Arduino board and the attached LCD shield.

Gallery

This page is part of Kitkraft's Project Hub — a curated collection of electronics & robotics projects gathered from the maker community to help students and hobbyists discover and learn to build. Kitkraft does not claim authorship of the original project, and makes no representation as to the accuracy, completeness or safety of third-party source material. The summary and "How It Works" explanation above are AI-generated, rewritten with reference to the original tutorial — not a reproduction of it. Full credit and a direct link to the original source are provided above. If you're the original creator and have a concern about how your work is represented here, please contact us and we'll address it promptly.

Kitkraft Project Hub — curated from the maker community, credited at the source.

PRJ-00432