Project Hub /Audio Displays & Interactive Media/E-Paper Display Systems/Make Smallest Touchscreen Raspberry Pi Laptop with E ink Display

Advanced

RASPBERRY PI

Project Specific

6 – 12 Hours

Partial Kit

Make Smallest Touchscreen Raspberry Pi Laptop with E ink Display

Build a pocket-sized miniature laptop using a Raspberry Pi, an E-ink touchscreen display, and Kali Linux, designed specifically for portable ethical hacking and penetration testing.

Originally published on ElectronicsForU

View original tutorial

Parts You'll Need

This project is sourced from another site, not written by us — this list is our best match of their components against what we stock, not a verified bill of materials. Always check the original blog (linked above) for the actual parts list before buying.

Raspberry Pi 3 - Model B+ 1.4Ghz 64-bit quad-core Processor with 1 GB Ram (Original) Rs. 9,810.00
400 Points Mini Solderless Prototype PCB Breadboard High Quality Rs. 89.00
MB102 Adjustable Breadboard Power Supply Module (3.3V & 5V) for Arduino & Raspberry Pi Rs. 139.00
Jumper Wire 10 Pin Male To Male 20cm Rs. 45.00
Jumper Wire 10 Pin Male To Female 20cm Rs. 45.00

Selected: Rs. 0.00

We don't carry yet: Battery (generic / unspecified)
TFT / Touch LCD
Enclosure / Box / Case
SD / MicroSD Card
charging system

Browse all components

How It Works

This advanced portable computing system integrates a Raspberry Pi 5 board running the Kali Linux operating system, stored on an SD card and accessed via a connected USB drive. The entire hardware assembly is housed inside custom 3D printed case parts designed to fit the miniaturized form factor. Visual output and user interaction are handled by an E-ink touchscreen display connected to the Raspberry Pi, offering low power consumption and high readability. Power is supplied independently to the system via an integrated battery and charging system, allowing the miniature laptop to operate untethered in field environments. The Raspberry Pi 5 processes system commands and security tools executed through the Linux environment, while the E-ink display updates its electrophoretic pixels to render user interfaces and command-line outputs dynamically without requiring a traditional power-hungry backlit LCD panel.

Why Build This

Develop an ultra-portable, discreet hardware platform optimized for on-site penetration testing and field-based cybersecurity assessments.

Gain practical engineering experience integrating low-power E-ink display interfaces with high-performance single-board computers.

Design, fabricate, and assemble custom battery-powered enclosure architectures using 3D printing and advanced power management hardware.

Real-World Application

Discreet ethical hacking, penetration testing, portable field-testing, and cybersecurity assessments.

Skills You'll Learn

Embedded Linux system configuration

E-ink display integration

power management and battery charging circuits

3D printed mechanical assembly

mobile penetration testing tool deployment

Safety Precautions

Flagged during content review — not in the original source

This project utilizes an integrated battery and charging system; ensure proper handling of lithium-based cells to prevent short circuits, punctures, or thermal runaway during assembly and field use.

Technology Tags

RASPBERRY PI

E-INK DISPLAY

KALI LINUX

ETHICAL HACKING

3D PRINTING

TOUCHSCREEN

SPI

I2C

Frequently Asked Questions

Why use an E-ink display instead of a standard LCD for a miniature laptop?

E-ink displays consume significantly less power and remain easily readable in direct sunlight, making them ideal for portable, battery-operated field tools.

Can I run standard desktop applications on this setup?

Yes, the Raspberry Pi 5 runs Kali Linux, but E-ink refresh rates are optimized for text and low-motion interfaces rather than high-frame-rate video or rich graphics.

How do I install the operating system onto the Raspberry Pi?

You use the Raspberry Pi disk imager to flash the Kali Linux OS image directly onto your SD card before inserting it into the board.

Gallery

This page is part of Kitkraft's Project Hub — a curated collection of electronics & robotics projects gathered from the maker community to help students and hobbyists discover and learn to build. Kitkraft does not claim authorship of the original project, and makes no representation as to the accuracy, completeness or safety of third-party source material. The summary and "How It Works" explanation above are AI-generated, rewritten with reference to the original tutorial — not a reproduction of it. Full credit and a direct link to the original source are provided above. If you're the original creator and have a concern about how your work is represented here, please contact us and we'll address it promptly.

Kitkraft Project Hub — curated from the maker community, credited at the source.

PRJ-00667