Project Hub /Audio Displays & Interactive Media/Analog Audio & Amplifier Circuits/Bluetooth Music Player And Speaker

Intermediate

ANALOG / DISCRETE

₹500 – ₹1,500

3 – 6 Hours

Partial Kit

Bluetooth Music Player And Speaker

A DIY project showing how to build a custom Bluetooth music player and speaker using the KCXBT003 receiver chip and PAM8406 audio amplifier.

Originally published on ElectronicsForU

View original tutorial

Parts You'll Need

This project is sourced from another site, not written by us — this list is our best match of their components against what we stock, not a verified bill of materials. Always check the original blog (linked above) for the actual parts list before buying.

Microphone module - Analog Sound Sensor Module for Arduino Rs. 63.00
2-Slot 18650 Holder with Protective Cover and On/Off Switch – Case Rs. 109.00
10pcs - 220 ohm 1/4 W Resistor Set Rs. 39.00
400 Points Mini Solderless Prototype PCB Breadboard High Quality Rs. 89.00
MB102 Adjustable Breadboard Power Supply Module (3.3V & 5V) for Arduino & Raspberry Pi Rs. 139.00
Jumper Wire 10 Pin Male To Male 20cm Rs. 45.00
Jumper Wire 10 Pin Male To Female 20cm Rs. 45.00

Selected: Rs. 0.00

This list includes a generic resistor set as a placeholder — it is not matched to the exact value or part number this circuit needs. The correct one is specified on the original source page linked above; check it before buying.

We don't carry yet: Battery (generic / unspecified)
Microcontroller IC (DIP) / Chip
Speaker / Audio Amplifier
SD Card Module
Battery Charger Module TP4056
Enclosure / Box / Case

Browse all components

How It Works

The Bluetooth Music Player and Speaker system operates by receiving wireless audio data and driving physical speaker cones to produce sound. At the heart of the wireless section is the KCXBT003 Rx chip, which pairs with external transmitting devices like smartphones to stream audio data. For local playback, an optional SD card module can interface with the system to supply pre-recorded audio files directly. Once the digital audio stream or local media is processed, the audio signal travels to the PAM8406 amplifier chip. The PAM8406 is a dual-channel audio amplifier that takes the low-level line signal and boosts its voltage and current drive capability so it can efficiently move the attached speaker drivers. System control is handled through physical control switches, allowing users to manage playback functions, while an integrated microphone enables voice communication features. Power is supplied either via a 5V DC power supply or a rechargeable battery managed by a dedicated charging module, with pull-down or current-limiting resistors utilized throughout the circuit for biasing and signal conditioning. All of these electrical components are housed together inside a custom enclosure to form a standalone portable audio unit.

Why Build This

Apply undergraduate-level analog and power electronics principles to design an integrated wireless audio system.

Gain hands-on experience integrating specialized receiver and amplifier integrated circuits within a custom enclosure.

Develop practical skills in power management by configuring battery charging modules and DC power supply rails for audio hardware.

Real-World Application

Custom portable wireless speakers and DIY audio entertainment systems.

Skills You'll Learn

Audio amplifier integration

Wireless receiver configuration

Power supply and battery management

PCB or circuit wiring layout

Switch and control interface design

Safety Precautions

Ensure proper polarity when connecting the power supply and battery charging modules to prevent short circuits.

Technology Tags

BLUETOOTH

AUDIO AMPLIFICATION

PCB DESIGN

SD CARD MODULE

PAM8406

KCXBT003

Frequently Asked Questions

Can I power this project using a standard lithium battery?

Yes, provided you use a compatible battery charging and protection module to safely manage power delivery and prevent overcharging or short circuits.

Is programming or software required to operate the KCXBT003 chip?

No software or coding is listed for this project; the KCXBT003 operates via hardware control and onboard firmware, relying on physical switches for user input.

What is the purpose of the PAM8406 chip in this circuit?

The PAM8406 acts as the audio power amplifier, boosting the weak audio signals from the receiver chip so they are strong enough to drive the speaker drivers effectively.

Gallery

This page is part of Kitkraft's Project Hub — a curated collection of electronics & robotics projects gathered from the maker community to help students and hobbyists discover and learn to build. Kitkraft does not claim authorship of the original project, and makes no representation as to the accuracy, completeness or safety of third-party source material. The summary and "How It Works" explanation above are AI-generated, rewritten with reference to the original tutorial — not a reproduction of it. Full credit and a direct link to the original source are provided above. If you're the original creator and have a concern about how your work is represented here, please contact us and we'll address it promptly.

Kitkraft Project Hub — curated from the maker community, credited at the source.

PRJ-00584